Project Login
Registration No:
Password:
MAIL ALERTS SMS ALERTS
 
     
   
     

PRIORITY MANAGEMENT FOR TRAFFIC SIGNAL USING HANDHELD DEVICE USING RF

Platform : Embedded System Projects

AIM: The main aim of the project is to design a system which will be helpful for the vehicles in the highly rush area. PURPOSE: The purpose of the system is to help VIP person who are in emergency by clearing the traffic and giving the way to the vehicle using RF technology. METHODOLOGY: BLOCKDIAGRAM: TRANSMITTER SECTION: RECEIVER SECTION: POWER SUPPLY: DESCRIPTION: This project consists of two parts RF Transmitter part and RF Receiver. Whenever VIP’s vehicle enters into heavy traffic jam area it will send signal to the controller by pressing key from the keypad which is connected to the controller. Controller will access this data and passes to the transmitter. RF transmitter sends this information to the Receiver part which is located at the traffic signal indicator. After receiving the data from the transmitter, receiver will indicate to the microcontroller that vehicle is located in that area. According to that receiver section will clear the traffic in desired way by indicating Green LED. TECHNOLOGY: Every system is automated in order to face new challenges in the present day situation. Automated systems have less manual operations, so that the flexibility, reliabilities are high and accurate. Hence every field prefers automated control systems. Especially in the field of electronics automated systems are doing better performance. Any automated system will work effectively if it access wirelessly. Here in this project we are going to use RF communication for remote accessing of automated system. Probably the most useful thing to know about the RF communication is that it is an international standard communication. RF communication works by creating electromagnetic waves at a source and being able to pick up those electromagnetic waves at a particular destination. These electromagnetic waves travel through the air at near the speed of light. The wavelength of an electromagnetic signal is inversely proportional to the frequency; the higher the frequency, the shorter the wavelength. SOFTWARE USED: 1. Embedded C 2. Keil IDE 3. Uc-Flash HARDWARE USED: 1. Micro Controllers 2. Power Supply 3. RF Transmitters & Receivers 4. Encoder & Decoder 5. Keypad 6. LCD 7. LEDS RESULT: Hence, by using this project way will be clearing the traffic signaling for VIP vehicles in heavy traffic areas by using RF technology.

NOW GET PROJECTS ! GET TRAINED ! GET PLACED !

IEEE, NON-IEEE, REAL TIME LIVE ACADEMIC PROJECTS,

PROJECTS WITH COMPLETE COURSES,SOFT SKILLS & PLACEMENTS

ALLOVER INDIA & WORLD WIDE,

HOSTEL FACILITY AVAILABLE FOR GIRLS & BOYS SEPARATELY,

CALL: 08985129129 ,  E-Mail Id: support@ascentit.in

REGISTER FOR PROJECTS NOW ! GET DISCOUNT
   
1