Project Login
Registration No:
Password:
MAIL ALERTS SMS ALERTS
 
     
   
     

TOPOLOGY CONTROL IN MOBILE AD HOC NETWORKS WITH COOPERATIVE COMMUNICATIONS

Platform : WIRELESS COMMUNICATIONS

IEEE Projects Years : 2012

TOPOLOGY CONTROL IN MOBILE AD HOC NETWORKS WITH COOPERATIVE COMMUNICATIONS

Abstract
Cooperative communication has received tremendous interest for wireless
networks. Most existing works on cooperative communications are focused on link-level
physical layer issues. Consequently, the impacts of cooperative communications on
network-level upper layer issues, such as topology control, routing and network capacity,
are largely ignored. In this article, we propose a Capacity-Optimized Cooperative
(COCO) topology control scheme to improve the network capacity in MANETs by
jointly considering both upper layer network capacity and physical layer cooperative
communications. Through simulations, we show that physical layer cooperative
communications have significant impacts on the network capacity, and the proposed
topology control scheme can substantially improve the network capacity in MANETs
with cooperative communications.
Architecture
IEEE 2012 Transactions on Wireless Communications, Volume: 9 , Issue: 2
Topology
Capacity-Optimized Cooperative (COCO):
A Capacity-Optimized Cooperative (COCO) topology control scheme to
improve the network capacity in MANETs by jointly optimizing transmission
mode selection, relay node selection, and interference control in MANETs with
cooperative communications. Through simulations, we show that physical layer
cooperative communications have significant impacts on the network capacity,
and the proposed topology control scheme can substantially improve the
network capacity in MANETs with cooperative communications.
Existing System
Most existing works are focused on link-level physical layer issues, such as
outage probability and outage capacity. Consequently, the impacts of cooperative
communications on network-level upper layer issues, such as topology control, routing
and network capacity, are largely ignored. Indeed, most of current works on wireless
networks attempt to create, adapt, and manage a network on a maze of point-to-point
non-cooperative wireless links. Such architectures can be seen as complex networks of
simple links.
Disadvantages:
1. Low Network Capacity.
2. Communications are focused on physical layer issues, such as decreasing outage probability
and increasing outage capacity, which are only link-wide metrics.
Proposed System
We propose a Capacity-Optimized Cooperative (COCO) topology control
scheme to improve the network capacity in MANETs by jointly considering both upper
layer network capacity and physical layer cooperative communications. Through
simulations, we show that physical layer cooperative communications have significant
impacts on the network capacity, and the proposed topology control scheme can
substantially improve the network capacity in MANETs with cooperative
communications.
Advantages:
1. Improve the network capacity in MANETs.
2. Dynamic traffic pattern and dynamic network without a fixed infrastructure.
3. There are a source, a destination and several relay nodes.
4. Cooperation can benefit not only the physical layer, but the whole network in many
different aspects.
Modules:
1. Transmission in MANETs
2. Network Constraints
3. Relaying Strategies
4. Cooperative Communications
5. Multi-hop Transmission
1. Transmission in MANETs:
With physical layer cooperative communications, there are three transmission
manners in MANETs: direct transmissions, multi-hop transmissions and cooperative
transmissions. Direct transmissions and multi-hop transmissions can be regarded as
special types of cooperative transmissions. A direct transmission utilizes no relays while
a multi-hop transmission does not combine signals at the destination. In Fig. 1c, the
cooperative channel is a virtual multiple-input single-output (MISO) channel, where
spatially distributed nodes are coordinated to form a virtual antenna to emulate multiantenna
transceivers.
2. Network Constraints:
Two constraint conditions need to be taken into consideration in the proposed
COCO topology control scheme. One is network connectivity, which is the basic
requirement in topology control. The end-to-end network connectivity is guaranteed via a
hop-by-hop manner in the objective function. Every node is in charge of the connections
to all its neighbors. If all the neighbor connections are guaranteed, the end-to-end
connectivity in the whole network can be preserved. The other aspect that determines
network capacity is the path length. An end-to-end transmission that traverses more
hops will import more data packets into the network. Although path length is mainly
determined by routing, COCO limits dividing a long link into too many hops locally.
The limitation is two hops due to the fact that only two-hop relaying is adopted.
3. Relaying Strategies:
• Amplify-and-forward
• Decode-and-forward
In amplify-and-forward, the relay nodes simply boost the energy of the
signal received from the sender and retransmit it to the receiver. In decode-andforward,
the relay nodes will perform physical-layer decoding and then forward
the decoding result to the destinations. If multiple nodes are available for
cooperation, their antennas can employ a space-time code in transmitting the
relay signals. It is shown that cooperation at the physical layer can achieve full
levels of diversity similar to a MIMO system, and hence can reduce the
interference and increase the connectivity of wireless networks.
4. Cooperative Communications:
Cooperative transmissions via a cooperative diversity occupying two consecutive
slots. The destination combines the two signals from the source and the relay to decode
the information. Cooperative communications are due to the increased understanding of
the benefits of multiple antenna systems. Although multiple-input multiple-output
(MIMO) systems have been widely acknowledged, it is difficult for some wireless mobile
devices to support multiple antennas due to the size and cost constraints. Recent studies
show that cooperative communications allow single antenna devices to work together to
exploit the spatial diversity and reap the benefits of MIMO systems such as resistance
to fading, high throughput, low transmitted power, and resilient networks.
5. Multi-hop Transmission:
Multi-hop transmission can be illustrated using two-hop transmission. When
two-hop transmission is used, two time slots are consumed. In the first slot, messages
are transmitted from the source to the relay, and the messages will be forwarded to the
destination in the second slot. The outage capacity of this two-hop transmission can be
derived considering the outage of each hop transmission.
HARDWARE & SOFTWARE REQUIREMENTS:
HARDWARE REQUIREMENTS:
· System : Pentium IV 2.4 GHz.
· Hard Disk : 40 GB.
· Floppy Drive : 1.44 Mb.
· Monitor : 15 VGA Color.
· Mouse : Logitech.
· Ram : 512 MB.
SOFTWARE REQUIREMENTS:
· Operating system : Windows XP Professional.
· Coding Language : C#.NET



NOW GET PROJECTS ! GET TRAINED ! GET PLACED !

IEEE, NON-IEEE, REAL TIME LIVE ACADEMIC PROJECTS,

PROJECTS WITH COMPLETE COURSES,SOFT SKILLS & PLACEMENTS

ALLOVER INDIA & WORLD WIDE,

HOSTEL FACILITY AVAILABLE FOR GIRLS & BOYS SEPARATELY,

CALL: 08985129129 ,  E-Mail Id: support@ascentit.in

REGISTER FOR PROJECTS NOW ! GET DISCOUNT
   
1